Application:
This machine is a flexo printing machine which adopts flexible
photosensitive resin plates,rubber plates as the base material,
anilox rollers for transferring ink,liquid ink for printing. It is
controlled centrally by PLC system and generally consists of
unwinding section, infeed section,printing section, drying section,
outfeed section, rewinding section and control section.This machine
is an ideal machine for printing paper cup, carton, paper bag,
paper package, and so on.
Product Features:
1.Separate single-station unwinding rollstand with hydraulic
lifting device; 3“ pneumatic shaft for loading material;
Automatically constant tension controller for unwinding tension
control and EPC web guide control system for material alignment;
alarm function for reminding replacing material, stopping-machine
device for detecting material broken.
2.The machine is mainly controlled by inverter-fed motor with
synchronization belt.
3.Double rubber nipper roller is used for paper feeding, whose
pressure can be adjusted by pneumatic component;taper tension
control system ensures the printing accuracy.
4.Ceramic anilox roller for ink transferring; single-blade reverse
ink-scraping system;
pneumatic clutch pressure for anilox rollers and plate rollers.
Automatic Preventing Clogging Function: when the machine stops, the
anilox roller will rotate to prevent the ink on its surface from
drying and blocking holes (meshes) on it.
5.Double rubber nipper roller is used for paper feeding of
rewinder, whose pressure can be adjusted by pneumatic component;
equip with picture color detection system (Kesai).
6.Single-station rewinding rollstand with hydraulic lifting device;
3" pneumatic shaft for loading material; stopping-machine device
for detecting material broken.
7.Separate drying system (electric heating); I.R. short-wave heater
drying system (the temperature is adjustable); hot air and natural
air drying system including exhaust fan and blower; central Exhaust
System (waste gas will be exhausted centrally by exhaust fan, it is
ready by user).
8.The whole machine is centrally controlled by siemens PLC system,
which has monitors the machine status;the running speed can be
adjusted at multiple points.
Technical Parameters:
Specification
Max. Web Width
Max. Printing Width
Max. Die-cutting Width
Printing Repeat
Max. Unwinder Diameter
Max. Rewinder Diameter
Gearing
Max. Printing Speed
Diameter of Web Roller
Base Motor Power
Oil Used
Drying Mode
Power Requirement
|
| RZJ-1050A
1050mm
1030mm
1050mm
380-1200mm
1524mm
1524mm
1/8cp
150m/min
100mm
11kw-15kw
A. aqueous ink B.UV ink
A. Warm Drying B. IR Drying C. UV Drying
380V 3PH 50HZa | RZJ-1350A
1350mm
1330mm
1350mm
380-1600mm
1524mm
1524mm
1/8cp
150m/min
100mm
15kw-18.5kw
| ZJ-1550A
1550mm
1530mm
1550mm
380-1600mm
1524mm
1524mm
1/8cp
150m/min
100mm
18kw-22kw
|
hygmtanya@hotmail.com
+86-18202206657 Tanya Li
